The unit is designed to control & monitor the Advanced Power Conversion 19” rack mount 1U high PSU systems - APC-R3000, APC- R2400 & APC-R2250. It offers adjustment of the system voltage in 100mV steps over the range 23-29V for the APC-A0750 (750w) power units and 46-58V in the 800 watt (APC-A0800) & 1000 watt (APC-A1000) power units . Up to 12 hot swap power units can be used in parallel and the controller can be used to select a particular power unit position and read the current being drawn from that unit with a resolution of 100 mA. The APC-SCM-R
is powered from the bus voltage of the system.
|
APC-SCM-R controller
|
| Mechanical: The Control & Monitor Unit is a 1U high, 19” chassis with read-outs on the front panel, input & output at the rear. Depth behind panel < 100mm |
|
|
